Monthly Archive: August 2016

Cool Head HDT Measuring

Electronics cooling – selection, application, quality and costs of innovative cooling concepts in electronics effective heat management is today essential to more power, to ensure longer life and high reliability of electronic components. The thermal load, the individual elements are exposed is to reduce it. The development of suitable cooling concepts is therefore already at an early stage of the development of the hardware. Professionals in this field are rare. The targeted dissemination of know-how for this complex field of work is therefore all the more important. Electronics knowledge alone is often not enough. By the selection of material to the cooling of the body and of the temperature measurement to heat simulation the 7th meeting of electronics cooling – selection, application, quality and costs of innovative cooling concepts in electronics treated”challenges and solutions for cooling electronic components in a wide range of application areas. The development of hybrid and electric vehicles with provides extensive battery management of high performance and much electronics on the drive and in the control of vehicles for additional thrust for the topic.

The two-day symposium of the Haus der Technik employs on the 23 and 24 April 2013 cooling concepts in automotive electronics and many other topics in Stuttgart with the physical fundamentals of heat transfer, thermal management concepts, cost and reliability of cooling systems, heat dissipation for power semiconductors and LEDs. An accompanying exhibition offers additional information and contact opportunities. The event will take place in cooperation with the Steinbeis Research Centre “Thermal management in Electronics”. Target group all interested are addressed, dealing with the thermal management for electronic components or systems in the areas of research, development, design, quality and purchasing. For more information, see interested at the House of technology e.V., Tel. 0201/1803-329 (Mrs. Gebauer), E-Mail: or on the Internet: W-H010-04-232-3 Dipl.-ing. Kai banks man

Facebook IBM DB

In the current economic climate, reduce costs seems to be the way towards greater competitiveness. When the cost reduction is a priority, it is necessary to take measures in our technological environment. A good way of doing this is to reduce those that derive from the use of products or services that are commonly used. But, in this case, the reduction should not trim elements that could damage the quality of our work or the services that ofrercemos. Mitchel Resnick does not necessarily agree. To do this, we can invest part of our resources in the optimization tasks, shorter times of response, effective management of our databases and data compression.

Currently is possible to intregrar all these processes and benefits with some computer tools. DB2, for example, is a databases management system raised by IBM that uses systems of understanding that free space and allow that we can save us more than 50% of space. Thus reducing costs associated with maintenance and management of volume. One of the most notable improvements of this software is the Automation. The work is automated, eliminating routine tasks that consume a large part of our resources. Vladislav Doronin often says this. So is optimizao the performance of the system, by solving problems that may appear automatically (and even ahead of his appearance) another of the most noteworthy improvements of DB2 is found in the description of this product. Where we see how their applications are deployed and develop effective and easily although they have been created for use with a different database software. It also presents a strong capacity for understanding of data, which may vary according to the type of data that we have stored, but that usually give very good results. For further information on this system you can visit their official website and also its page of Facebook IBM DB2.

Brazilian Association

Moreover, the price of sales of the electronic games for funny cellular telephony around 10 Reals, while downloads for PC' s costs up to 45 Reals. Without counting the value of the games for consoles, that can arrive 200 Reals more than each. 2 the Brazilian Situation With the mission to promote the market of games in Brazil, was established in April of 2004 the Brazilian Association of the Desenvolvedoras de Electronic Jogos, the ABRAGAMES. It enters the incentives for the sector is the accomplishment of the BRGAMES, a program in partnership with the Ministry of the Culture, that has as objective to foment the development of the electronic games and the propitious environment creation in Brazil, beyond its participation in the external market. Due to increasing piracy in Brazil, mainly in what it refers to the games for consoles, the sales for the Internet, saw download and for the mobile market, that is, for cellular telephones, they have obtained to reach bigger profits each time, has seen that had to its value to be very lesser in comparison with the games for consoles and PC' s, also its users propitiate satisfactory entertainment.

Inside of this niche, what more he has called the attention the desenvolvedores, even though great companies as Nintendo and the Tec Toy, they are the accidental games. These are simple and unpretentious games, but they captivate its public for the jogabilidade and possibility using of them as it passes time at leisure moments. The market of development of accidental games still little is explored in comparison to the one of the industry of the electronic games for consoles. This if must to the existing limitations in the hardware of the mobile devices, therefore resources as memory, permanent storage and energy is abundant in computers traditional, but precious in small devices, as (KEOGH 2003), making it difficult the creation of games with bigger competitive quality.

BiznesMebel Equipment

This means that the quality is guaranteed shelf equipment. Whom to choose? Now turn to the choice of the manufacturer (or supplier). Now the market can find a lot of firms the main supplier of which is the company "BiznesMebel" offering shelf equipment. Some of them – local producers, while the other offers the products of foreign (German, Italian and other) companies. Very often firm-customers opt for local producers. Why? Because the warehouse has to be a 'live'. It can grow in size and height, regroup, move from one room to another, etc.

And therefore, it should be possible dozakazat shelf equipment items (frames, crossbars, traverses, decking) to quickly retrofit the warehouse. And easier to do when the hardware manufacturer – the locals. You to bolt? This is followed by a choice of racking system – or rather, the principle of fastening shelf complex (modulus) of each other. Currently, you have options: a fixed hook, bolt connection, and mixed (1 +2). What is a fixed-toe? One element of the punched holes of a complex configuration, in another cut and arch stamp hook (hook). The connection is made by institutions in the toe hole and lock it into position. What are the advantages of this compound? First and foremost is the ease of manufacture (and therefore fast and cheap) and easy to install – no mounting hardware. Furthermore, this scheme has following disadvantages: the perforation holes are deburred, the hooks are often dogibayutsya, the paint is applied too thickly.

From this hook is often not included in the hole without a sledgehammer. Before installing the required additional limb nearly every hook. To hook is not released from the compound during the operation rack complex, it is fixed by a special holder. The presence of the latter – a pledge of reliability throughout the structure. But to trace its presence in the long-term use of racks, the height of levels changed repeatedly, almost impossible. When the process involves 'human factor', the process becomes unpredictable. 'Lock installed or not installed?'. This idea would tear the customer constantly. The above risks are not racking system with a bolted connection. Inconvenience in it, only one – the presence of mounting hardware: bolts. But the equipment is not afraid of any dynamic loads, uneven floors, 'human factor', etc. As an example, the maximum load on the bolt diameter of 12 mm under a load of shelving tier to 3 m is 375 kg, and margin of the bolt – 1,500 kg (!). All of the above options for mounting the modules used in the import and domestic shelves. Nashi with the gain in price, but still inferior to foreign analogues in Technology production and stock. But the attractiveness of domestic racks recently been caught up with 'foreigners'.

Kontrons Performance

Award recognizes Kontrons high product and service quality and availability of Eching, March 18, 2013 Kontron performance award was awarded today the SKIDATA supplier. The award is for the first time been awarded by SKIDATA and distinguishes Kontrons longtime high product and service quality and availability. With an average vendor performance rating of 99.98% reached Kontron peaks in the SKIDATA supplier ranking Awards 2012 and easily the A-suppliers classification, the SKIDATA as a vendor performance quality of 94%. SKIDATA takes payment machines for parking tickets, which assemble the fabless company at Kontron and the embedded computer technology developed at Kontron Kontron since the year 2006. A vendor performance rating of 99.98 percent testifies to outstanding product and service quality and availability. Therefore we give our supplier performance award Kontron happy”, explains Hugo Rohner, CEO of SKIDATA AG. The fact is also that Kontron also the responsibility for the embedded computer design has. So the hardware design of the embedded system as well as the disassembly of the entire payment machines in one hand, which reduces Systemverantwortungs interfaces is up.”the interplay of development and manufacturing expertise makes system responsibility around and almost free of interface.

Our original are guarantee for high product quality also in the current production design and manufacturing services. Our logistics system in Augsburg is also perfectly played for years and ensures a consistently high delivery faithfulness for SKIDATA even with fluctuating end customer demand,”Norbert Hauser, Executive Vice President of marketing at Kontron explains. Kontron offers manufacturers of customer terminals, kiosk systems and other complex systems with input etter computer technology known as original in design and manufacturing services (short ODM). The services range from the development of embedded computing intelligence about the Assembly of systems to the management of the entire supply chain and this to to the customers and including lifecycle support. OEM customers such as SKIDATA can set up so fabless.

Climbing Tower

Such a playground with swings for children is a great place to play. There are such Aussenspielgerate in different sizes, made of wood or plastic. The latter is much smaller and is more prepared for infants, but can be also built up inside it. In the case of the wood finish, you must ensure that they are well painted and like twice a year with preservatives in order to ensure the protection from the weather. These follow the instructions of the wood preservative severe (respiratory protection, etc.) In addition – and more importantly – the safety of children paramount.

In the wood, you must look at smooth surfaces (Not for regrinding in between himself again) to prevent chipping especially on the children's reach areas. A flat surface for the climbing frame with swing is a prerequisite to obtain a guaranteed tip over. This will certainly not least through a firm anchoring – ideally with the help of a Betongussflache below the basic strains And anchoring screws, which are usually included in the delivery of Aussenspielgerates guaranteed. It is also advisable to build the playground with swings, either by the experts who supplied it, or consult friends and family. Alone or in pairs, the building through the sometimes very heavy wooden beams with little or no deal with. The latter obviously makes more fun, and the price is usually a barbecue or a dinner, as has every bit of it. Such a playground with swings you get in almost any hardware store or in stores for Aussenspielgerate. You can be advised on, ask for free.

The Economist

On the other hand, management systems documentary favor in these cases that the new organization has access to shared resources and complete information; that business documents are unified; that will reduce response times and accelerate processes; as well as also contributes to establishing the new corporate identity both-sided exterior and interior for the bewildered workers. The full preservation of the data is another fundamental aspect in which documentary management systems contribute positively to ensure both the maintenance of the information and the confidentiality of the same. Prevent the loss of documents, it prevents duplication of work and favors the adaptation to the new situation because it can be adapted to business deadlines. In addition, to control which users or departments are authorized to use certain information is fundamental function of the document management systems that implies that only a few people know the real situation in which one project both found inside or outside the Office, thanks to mobile devices. How to deal with business risks any company, regardless of size, should contemplate the technological risk may be present in all its productive processes.

Obviously, the greater your volume more impact will have in the economic as well as the structural aspects. A merger is a good opportunity for companies to incorporate a business strategy focused on the prevention of technological risks to your organization. Although it would be desirable for all types of organisation to contemplate the existence of this type of departments since its creation. According to the Global study of risks of it, made by IBM and The Economist, in general enterprises are not sufficiently prepared to deal with the risks and only some, half of those surveyed, has a risk management Department. Indeed, even perceived it as a situation risks only exclusive of IT without realizing it that form part of all the framework of risks and therefore the organization. Although increasingly perceives a greater interest in the management of this type of business risks, which comes to a greater extent motivated by the existing legislation in this area, is still needed a greater integration, so entrenched in companies the idea that it is at the same level as the production. You should make sure that all company note it from the first moment and not at the end where there has already been some mishap. I.e.

it is necessary to contemplate the risk strategy as a strategy for business and not isolated from the rest of departments or other aspects designed as potentially dangerous. In this aspect, there is still a way to go and policies of enterprises must be aware of the risks you must be located in the first line. For its part, software documentary technology manufacturers, and particularly those in document management systems, must assume its role to help these organizations understand the real risks of it can face that. I.e., help them understand the value of it and the value of the various components of the overall architecture of the company; and what is the right time to transform your architecture should something happen. In short, it’s helping customers to understand and mitigate some of the technological risks. Julio A. OlivaresPresidente and founder of DocPathSoftware’s document management

Hoisting Equipment

Pile hammer – the oldest building machine, which took the technical evolution from a simple mechanical "Baba", driven by hand, to vapor-air, diesel and, finally, the hammers. Creation of piling hammers in primarily engaged in the firm, is traditionally made pile-driving equipment. Among them is the firm Menck (Germany), for a long time, manufactured by vapor-piling hammers and Hoisting installation. The reasons for the firm to create hammers – higher efficiency of hydraulic drive, convenient operation, as well as reduced noise and pollution. Hammers, created by Menck, retained the general design features inherent in a simple vapor-hammer action. This allowed the use of constructive community not only machine tool and production equipment, but also time-tested solutions.

Rent construction equipment in the company "Golden Age" and a problem on your building site go away by themselves. In the Soviet Union also carried out work on the creation of hydraulic hammers simple steps, culminating in the creation of hydraulic hammer with the mass of the shock of 7500 kg. The design of piling hammers model mhf firm Menck (Germany), designed on the similar design scheme based on the principles: a large mass of the hammer breaker with a minimum gross weight (hammer performed in-pole version), the ability to use a hammer percussion parts with different masses and minimum stroke, allowing to lower the height of the breakers and create a hard, stable, easy to service design, low noise, meets the current sanitary standards, a wide range of adjustment in the number and energy of being struck by a hammer. Impact of the Hammer mhf can be moved along the guide rods are secured using screw connections at the top and bottom of the traverse. Rod construction hammer and a small mass element hydraulic give an opportunity to reduce the total weight of the hammer to a minimum, allowing pile hammer with a large slope (45 ). Impact of the Hammer is a hollow steel casting, whose mass can be increased by filling the cavity heavy metal.

This allows you to increase your energy and somewhat reduce the stiffness of shock. Lifting cylinder located between the hammer and the mast hoisting installation. The large diameter of the hammer breakers, striking a shock absorber on the wooden headgear, reduces the specific loads on impact, providing a long service life shock. Hydraulically driven hammer – a compact unit (module) attached to the upper cross with four bolts. Spring-loaded ball fingers connect the drive with a hammer. Thus, the hydraulic portion of the hammer is protected from excessive shock and operates within acceptable conditions for hydraulic equipment. The large mass of the hammer breaker allows you to work at low speed, virtually eliminating the possibility of damage to piles during pile. Impact Energy Hammer infinitely adjustable from 5% to a maximum value. The rise of the hammer on required height provides a mechanism of control, and you can apply individual strokes required energy. Services construction equipment provided by "Golden Age", have been shown to market for construction equipment. Model mhf – hammers with the free fall of the hammer, but a device fixed on the drive allows you to accelerate the movement of the hammer, resulting in the height of its fall may be increased to 1,2 m hammer is driven by a power station, installed on the hoisting installation. Hydraulic hammer has interchangeable grips, which can operate in complete with hoisting facilities of all kinds.

Masry Organization

The organization can never be autonomous and independent social functioning. for her first clients are people and then, a humanistic perspective of the organization. Manages company's internal conflicts and those of his own family (mother roles compatibility used), with the capacity to lead through persuasion. What psychologically involved in their actions: self-concept, persuasion, perseverance, self, language, and how to live the present. Erin identify this attitude in the perspective of Lasa guerrasa theories of psychology between March and Simon (1977) who assume that individuals bring to their organizations attitudes, values, breaking the myths of what is thinkable and not a business. a Ed Ed Masry presented initially with a kind of leadership a hierarchical or pyramidal and vertical a typical mechanical cutting companies and closed with a streamlined operation typical of a formal organization. But with values and emotions that make you able to reflect their decisions (the choice of its staff and Blenda or when to fire Erin thinks their differences in strategies of operation). Erin gets to be adaptive, delegating a job that others would not be efficient.

At this stage appears as a transformational leader, but remains stuck in the past in certain skills (your relationship with money when they motivates wage). Fulfills a role that so far has yielded the expected results or the thinkable within the company, hence its conservatism without regard to the environment but to its own context. To him are fundamental principles of efficiency and effectiveness as key management, because that expect to run your business.

Scientific Knowledge

– it does not supply the explanation nor allows the understanding of the true nature of the reality. – Search a practical application of its knowledge, searching always resulted and benefits immediate. Scientific knowledge – part of the skeptical position ahead of the reality (not it radical skepticism) doubts and looks for to justify the beliefs (critical attitude) – is an interpretation logical-rational of the data. – it bases its conclusions only in evidences. – it combines invention, logic, mathematics and experimentation, therefore it is a set of repeatable procedures. – it is a rational knowledge (justified belief) – it uses rigorous methods and it formulates hypotheses you tested. – it uses reasonings, tests and demonstrations to get rigorous conclusions concerning the functioning of the nature.

– he is objective, therefore, its comments independem of the personal opinions, and will have to obtain that the gotten conclusions can be verified by any another member of the scientific community, since its rationality looks for to eliminate the influence of the emotional one. For such it uses a rigorous language, whose concepts are established in order to prevent misunderstandings. This language is very it needs and it is used of the mathematics to transform qualities into amounts. – the characteristic of the verificabilidade possesss, therefore the hypotheses that cannot be proven do not belong to the scope of science. – even so its practical application is undeniable, its intention with the inquiry is to understand the causal structure of the world; to understand of that way functions the nature. – it is falvel and provisory, therefore, its theories are valid while new evidences for definitive phenomenon do not appear.

– it is the form most rigorous of knowledge of the humanity, however, exactly thus is provisory, therefore it depends on the evidences. – It is an interpretation of the reality therefore: ) the scientific knowledge does not translate the reality as it is in same itself, nor is the only way to fit the reality. b) in supplies a vision to them of the according to perspective reality of the reason, that sees the vast order of the universe, alive and inanimate substance, as a material system governed by rules that the mind human being can learn. IT HAS MORE FORMS TO INTERPRET THE REALITY: – the scientific vision of the world does not answer to all our concerns: ' ' it shows to us what it exists, but not what to make with isto' '. – all the interpretations have origin in the curiosity before the felt world ena search of for the existence.