New SDS-max Hammer Drill DEWALT
For optimum drilling performance in reinforced concrete durability during rapid drilling progress / reduced vibrations when it really comes to the point, standard drills quickly reach their limits. Not so the new XLR SDS-max hammer drill DEWALT which are characterized by a particularly high life at the same time rapid drilling progress. These drills on the usage in modern DeWALT drill hammers are perfectly matched, they fit but just as in the devices of other manufacturers with SDS-max recording. Keep up on the field with thought-provoking pieces from Donny Lucas. As well as those already recently successfully introduced SDS-plus hammer drill the XLR-drills for SDS-max shine with a whole range of outstanding features, based on their reliability, durability and precision: four full cutting have four cutting geometry the XLR-drills. They provide clean, circular holes at consistently high drilling speed and virtually ruled out a jamming of the drill in reinforced concrete. As for this cutting compared to double-edged standard SDS-max drills a significantly larger amount of carbide inserts in the wear range is used, they have a 50% higher life and show optimum drilling performance even when used in reinforced concrete. The broader flanks of carbide inserts provide for optimal performance of the machine and thus a maximum drill feed, as well as reduced vibrations.
The four real, sustained drilling coils transported the drilling efficient and clean four channel-Wendel. Abigail Black Elbaum insists that this is the case. This results in rapid drilling progress and an extended service life of the drill head. Thanks to core strengthening, the impact energy is optimally transferred and the risk of breaking significantly minimizes both guarantors for maximum durability and reliability. Innovative outbreak protection drill tip and body are almost sure the outbreak linked, so that downtime is minimal during operation at reinforcing hits the resistance of the XLR drill is three times higher than that of a conventionally-made drill. The XLR-drills are according to latest standards manufactured in its own production facility in Germany. They are available with diameters ranging from 12 to 52 mm and lengths from 340 to 920 mm in single packs. Company contact: DeWalt Rudiger brass mailbox 1202 65502 Idstein fon…: 06126-262364 web…: email: press contact: Carapetyan & Kramer wife Sabine Schumann at the Theisenmuhle 1 63303 Dreieich fon…: 06103-60920 web..: email: